Overview for Pipe clamp valve:
One, the main structures:
The valve consists of valve body, valve rod, rubber sleeve size, plate, rod, a bracket, a hand wheel and other parts.
Two, the principle of work
When turn the handwheel clockwise, the size of the stem and is rotated to drive the upper and lower plates to compress the rubber sleeve to a close and will be open. This plate in tension rod between the up and down reciprocatina movement to complete the valve opening and closing work.
In three, the matters needing attention:
Because the rubber sleeve bearing force is small so in the opening and closing, the operating personnel rotation handwheel was appropriate as lono as the conflict, to open and close the pole. Do not try to and more support disable other tools to open and close.
Four installation and maintenance:
The valve in the pipe installation without any restrictionsthe flow direction of medium.
The valve maintenance cost is low there is no need regular replacement of valve seat sealing filler. a sealing ring or a telescopic tube.Tube is a pipe clamp valve only need to replace parts, once the replacement of the hose valve as the new valve. This valve requires little other parts inventory.
Drawing for Pipe clamp valve :
The main performance specification for Pipe Clamp Valve:
| Applicable temperature | Applicable medium |
| ≤85℃ | Pulp, abrasive, wet type dust category |
The major parts meterial for Pipe clamp valve:
| Name | Material |
| Body | Aluminum, cast iron, cast steel |
| Rubber bushing | Rubber |
| The size of the stem | Cast copper.carbon steel |
| Platen | Cast iron |
| Trolley | Cast iron |
| Bracket | Nodular cast iron |
| Handwheel | Cast iron |
Hot Tags: Pipe Clamp Valve, China, manufacturers, suppliers, factory, price, ductile iron, made in China
